Technical Specification

CLAMP UNIT	(Metric)	(English)
Clamp Force	9 Tonnes	9 Tons
Full Stroke	70 mm	2.7 in
Tie Bar Diameter	25 mm	1.0 in
Distance Between Bars	110 mm	4.3 in
Fastest Closing/Opening Speed	1.9 Secs	1.9 Secs
Max Mould Size H x V	100 mm x 130 mm	3.9 in x 5.1 in
Mould Thickness	110 mm	4.3 in
INJECTION UNIT	(Metric)	(English)
Screw Diameter	16 mm	0.63 in
Screw Ratio	2:1 or 4:1
Hopper Capacity	3 Kgs	6.6 lbs
PLUNGER OPTIONS @ 7 bar system pressure	(Metric)	(English)
Plunger Diameter	10 mm	0.39 in
Capacity	7 grams	0.25 ozs
Pressure	1,283 bar	18,333 psi
Plunger Diameter	13 mm	0.5 in
Capacity	12 grams	0.42 ozs
Pressure	752 bar	10,751 psi
Plunger Diameter	18 mm	0.7 in
Capacity	22 grams	0.78 ozs
Pressure	393 bar	5,608 psi
Plasticising Capacity (8.1 sec. Cycle)	4.89 Kg/hour	10.7 lbs/hour
GENERAL DETAILS	(Metric)	(English)
Size of Machine (L x H x W)	1000 x 1300 x 900 mm	39 x 51 x 35 in
Weight	240 kgs	530 lbs
Size of Panel (L x H x W)	480 x 170 x 320 mm	18.8 x 6.7 x 12.5 in
Power Supply	240 V 50hz	110 V 60hz
Total Heater Rating	3 Kw
Av. Operational Rating (Heaters)	1.8 Kw
Water Supply	2 Litres/min @ 10C
Air Supply	Approx. 350 Lrs/min free air